AHExp

The 3000 Forum

Cupped spider gear thrust washers

Moss Motors
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor

tadrink TERRY DRINKWATER
RICHMOND, BRITISH COLUMBIA, Canada   CAN
Cannot find any of the cupped spider gear thrust washers for the austin healey 3000 rear end differential.
does anybody have any?? the flat ones are available but not the cupped ones. have tried overseas and other
distributors to no avail.



Edited 1 time(s). Last edit at 2017-10-10 08:13 PM by tadrink.

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
brims49 Avatar
brims49 Andrew Brims
Peachland, BC, Canada   CAN
Could " IWE rear ends only ", be able to help? They are a local machine shop in your area specializing in rear diffs.

Good luck, Andy

tadrink TERRY DRINKWATER
RICHMOND, BRITISH COLUMBIA, Canada   CAN
They han old carrier that I could buy for couple hundred dollars but would rather spend ten dollars
if I can find a thrust washer, they were never remanufactured. Im hoping an mga type will fit or adapt to it.
tried everybody on lower mainland

Thanks anyway.

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
petnatcar Avatar
petnatcar Silver Member Peter Carbone
Watertown, New York, USA   USA
Terry,

If worse comes to worse check with some local machine shops and bring the washers with you.

Differential shops may have something like that too.

. Hide banner ads & support this website by becoming a > Gold Supporting Member <

To add your reply, or post your own questions

Members Sign In   or   Create an Account

Registration is FREE and takes less than a minute!


Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster





Join The Club

Sign in to ask questions, share photos, and access all website features

Your Cars

1957 Austin Healey 100 Six

Text Size

Larger Smaller
Reset Save

Sponsor Links