AHExp

Buy, Sell & Trade Forum

BJ8 and BT7 parts for sale

. Become a Supporting Member to hide the ad above & support a small business
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor
cpcooper Avatar
cpcooper Gold Member Craig Cooper
Chico, CA, USA   USA
Sign in to contact
Oops! For my BN6, so late BN1 through BN/BT7.

Thanks,

Craig


Attachments:
Striker Plate (2).jpg    47.7 KB
Striker Plate (2).jpg

Was this post helpful or interesting?
Yes No Thank
. Become a Supporting Member to hide the ad above & support a small business
Healey Nut Avatar
Healey Nut Graham Boardman
Spencerville, ON, Canada   CAN
Sign in to contact
Maybe , give me a couple of days to have a look in some boxes and let you know . I know I installed new on my car so in theory I should have a couple of used ones ……….somewhere ??



That’s not an oil leak , it’s my patent pending rust proofing system .

Was this post helpful or interesting?
Yes No Thank
Healey Nut Avatar
Healey Nut Graham Boardman
Spencerville, ON, Canada   CAN
Sign in to contact
Strike out here Craig , I must have binned them . I know they were not pretty .



That’s not an oil leak , it’s my patent pending rust proofing system .

Was this post helpful or interesting?
Yes No Thank
cpcooper Avatar
cpcooper Gold Member Craig Cooper
Chico, CA, USA   USA
Sign in to contact
No problem. Kev has me covered. Thanks for looking though.

Craig

Was this post helpful or interesting?
Yes No Thank
. Become a Supporting Member to hide the ad above & support a small business
about 2 months and 1 week later...
Weltyrr Avatar
Weltyrr Russell Welty
Franklin, TN, USA   USA
Sign in to contact
I’m interested in parts for our BJ8 project. Can you email me a list of what you have left? weltyrr@gmail.com

Was this post helpful or interesting?
Yes No Thank
Healey Nut Avatar
Healey Nut Graham Boardman
Spencerville, ON, Canada   CAN
Sign in to contact
In reply to # 296806 by Weltyrr I’m interested in parts for our BJ8 project. Can you email me a list of what you have left? weltyrr@gmail.com

The list on page one of the listing is what I have plus lots of other bits n pieces too numerous to list . Be specific as to what you’re looking for and I can tell you if I have it .
Tks for your interest .



That’s not an oil leak , it’s my patent pending rust proofing system .

Was this post helpful or interesting?
Yes No Thank
about 1 month and 3 weeks later...
Big6Mark Avatar
Big6Mark Mark M
Emerald Valley, OR, USA   USA
Sign in to contact
1960 Austin-Healey 3000
1968 MG MGC
1968 MG MGC "Red Tail"
1968 MG MGC GT "The Wreck"    & more
Graham:

I am in need of hardware for my BT7 restoration.

Do you still have the "1pair rear Hardtop latch rods and aluminum wing nuts HOD261/263" available?

email back if you need to, thanks.

C Ya,
Mark

Was this post helpful or interesting?
Yes No Thank
Healey Nut Avatar
Healey Nut Graham Boardman
Spencerville, ON, Canada   CAN
Sign in to contact
In reply to # 299378 by Big6Mark Graham:

I am in need of hardware for my BT7 restoration.

Do you still have the "1pair rear Hardtop latch rods and aluminum wing nuts HOD261/263" available?

email back if you need to, thanks.

C Ya,
Mark

Hi Mark .
Yes still got them , will dig them out and send you pics tomorrow to your listed email .
Tks , Graham l



That’s not an oil leak , it’s my patent pending rust proofing system .

Was this post helpful or interesting?
Yes No Thank
about 7 months and 2 weeks later...
Hot4aB Avatar
Hot4aB Silver Member Richard Gray
Phoenix, AZ, USA   USA
Sign in to contact
Graham,
I am looking for these parts for my BJ7, some on your list and some not:

Vertical bar grille
Crankshaft timing chain sprocket
Front bumper brackets
Cockpit rear molding
Dipper switch
Interior rear view mirror

Shipped to Phoenix, AZ.

Thanks,
Richard

Was this post helpful or interesting?
Yes No Thank
Big6Mark Avatar
Big6Mark Mark M
Emerald Valley, OR, USA   USA
Sign in to contact
1960 Austin-Healey 3000
1968 MG MGC
1968 MG MGC "Red Tail"
1968 MG MGC GT "The Wreck"    & more
Graham:

Got the pics of the hardtop hooks in October.

Told you that I would buy them. Still waiting for price quote including shipping to 97477?

Now you say that you sold to someone???

C Ya,
Mark



Edited 1 time(s). Last edit at 2025-05-22 10:15 PM by Big6Mark.

Was this post helpful or interesting?
Yes No Thank
Healey Nut Avatar
Healey Nut Graham Boardman
Spencerville, ON, Canada   CAN
Sign in to contact
In reply to # 310160 by Hot4aB Graham,
I am looking for these parts for my BJ7, some on your list and some not:

Vertical bar grille
Crankshaft timing chain sprocket
Front bumper brackets
Cockpit rear molding
Dipper switch
Interior rear view mirror

Shipped to Phoenix, AZ.

Thanks,
Richard

Email sent with pics of parts .
Check ur mail inc junk mail .
Graham .



That’s not an oil leak , it’s my patent pending rust proofing system .

Was this post helpful or interesting?
Yes No Thank
about 1 month and 2 weeks later...
Big Red Healey Reed Saunders
San Diego, CA, USA   USA
Sign in to contact
Do you have a folding top assembly for a BT7?

Was this post helpful or interesting?
Yes No Thank
Healey Nut Avatar
Healey Nut Graham Boardman
Spencerville, ON, Canada   CAN
Sign in to contact
In reply to # 312530 by Big Red Healey Do you have a folding top assembly for a BT7?

Sorry , not anymore . That’s long since gone .



That’s not an oil leak , it’s my patent pending rust proofing system .

Was this post helpful or interesting?
Yes No Thank
about 1 month and 2 weeks later...
Jimbopep Jim P
Prescott, AZ, USA   USA
Sign in to contact
I'm looking for the nuts & hardware to attach a luggage rack at the trunk???

Was this post helpful or interesting?
Yes No Thank
Healey Nut Avatar
Healey Nut Graham Boardman
Spencerville, ON, Canada   CAN
Sign in to contact
In reply to # 314473 by Jimbopep I'm looking for the nuts & hardware to attach a luggage rack at the trunk???

Luggage racks were not standard on Healeys . I have no idea what thread size/type you need but any good nut and bolt store should have what you need .



That’s not an oil leak , it’s my patent pending rust proofing system .

Was this post helpful or interesting?
Yes No Thank
. Become a Supporting Member to hide the ad above & support a small business

To reply or ask your own question:

or

Registration is FREE and takes less than a minute

Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or click Contact Support at the bottom of the page.



. Become a Supporting Member to hide the ad above & support a small business


Join The Club
Sign in to ask questions, share photos, and access all website features
Your Cars
1961 Austin Healey 3000
Text Size
Larger Smaller
Reset Save